|Place of Origin:||Made in China|
|Certification:||ISO14001, ISO9001, UL, cUL, TS16949|
|Minimum Order Quantity:||1|
|Packaging Details:||Vacuum package, carton package|
|Delivery Time:||5-15 working days|
|Payment Terms:||T/T, Western Union, Paypal ect.|
|Supply Ability:||60,000sqm per month|
|PCB Base Material:||FR4 TG150||Circuit Board Copper:||35um/35um|
|Layer:||4,6,8,10,12,14,16||PCB Surface Finishing:||ENIG|
|Solder Mask:||Green||Silk Screen:||White|
|Min. Line Width:||3mil/3mil||Min. Hole Size:||0.15mm|
|Application:||RF Microwaves, High-speed Designs, Military, Automotive Industries, Mobile Application Microwave Point To Point, RF Identification Tags, Automotive Radar And Sensors||Testing:||100%E-Testing, PCB Flying Test, AOI, X-RAY, PCBA Funtion Test/Electronic Test|
FR4 TG150 Base Multi Layer PCB,
FR4 TG150 Multilayer PCB,
High Performance Multilayer PCB
Our company has about 1100 workers and two PCB workshops with about 50000 square meters.
Our products are mostly used in the field of Industrial Control, Telecommunication, Automotive products, Medical, Consumer, Security, and others.
What is the feature of Rogers PCB?
It is no doubt that Rogers PCBs have low electrical signal losses, low dielectric loss, and high-frequency range, and can be used for RF identification tags, automotive sensors, and power amplifiers.
The main difference between Rogers PCBs and ordinary PCBs is their use, ordinary PCBs are limited to a certain range of frequencies which is less than that of Rogers material. Rogers PCBs are mostly used in high-frequency applications purposes above 500 Mhz, while ordinary PCBs cannot be applicable to use while you are dealing with applications using high frequencies. The ideal PCB material should have the characteristics of zero moisture absorption when it is placed in liquid. Most of the substances offer an absorption value of in-between 0.01 percent and 0.20 percent. Absorption percentage has a direct relation to the thermal and electrical properties of the material Higher the absorption percentage, the higher will be the influence on the thermal and electrical properties of the material and will reduce performance and efficiency.
What ABIS can make?
|Single-side and Double-Side & Multilayer PCB||PTFE BASE, FR-4 High Tg|
|FR-1, CEM-1, CEM-3, Aluminum Based Copper-Based, Iron-Based||Aluminum Based PCB (1-2L)|
|Multilayer PCB (4-16L)||Lead-Free HASL / Hot Air Solder Leveling|
|Immersion Tin / Immersion Gold / Immersion Silver||Selective Plating / Entek Coating|
|Peelable Mask / Carbon Ink Printing||CNC V-Cut / Gold Finger Process|
|Blind / Buried Via Hole for ML. macro-vias, impedance controlled boards||ROHS and Halogen Free PCB, WEEE|
What capacity does ABIS have?
|Raw material||FR-4, High TG FR-4, PTFE, Aluminum Base, Cu base. Rogers, etc|
|Layer||1 Layer-20 Layer|
|Insulation Layer Thickness||0.075mm--5.00mm|
|Min.hole size||0.1mm (drilling hole)|
|Max. Board size||1200mm*600mm|
|Out Layer Copper Thickness||18um--350um|
|Inner Layer Copper Thickness||17um--175um|
|NPTH Hole Tolerance||+/- 0.075mm|
|PTH hole Tolerance||+/-0.05mm|
|Surface finished||HASL, ENIG, Chem. Tin, Flash Gold, OSP, Gold finger|
|Solder Mask Type||LPI|
What is your Lead Time?
|Category||Q/T Lead time||Standard Lead Time||Mass Production|
|2 Layers||24hrs||3-4 working days||8-15 working days|
|4 Layers||48hrs||3-5 working days||10-15 working days|
|6 Layers||72hrs||3-6 working days||10-15 working days|
|8 Layers||96hrs||3-7 working days||14-18 working days|
|10 Layers||120hrs||3-8 working days||14-18 working days|
|12 Layers||120hrs||3-9 working days||20-26 working days|
|14 Layers||144hrs||3-10 working days||20-26 working days|
|16-20 Layers||Depends on the specific requirements|
|20+ Layers||Depends on the specific requirements|
Contact Person: Ryan