Home ProductsMetal Core PCB

1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights

1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights

1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights
1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights
1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights
Product Details:
Place of Origin: Made in China
Certification: ISO14001, ISO9001, UL, cUL, TS16949
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Customized
Packaging Details: vacuum package
Delivery Time: 1-15 working days
Payment Terms: T/T, Western Union, paypal ect.
Supply Ability: 60,000sqm per month
Contact Now
Detailed Product Description
Base Material: Alu PCB Copper: 35um
PCB Thickness: 1.0mm Surface Finishing: Immersion Gold
Solder Mask: LPI Green Silk: White
Min. Line Width: 3mil Min. Hole Size: 0.20mm
Application: Electronic Product Product Name: 2 Layer
High Light:

1.5mm Thickness Metal Core PCB


35um LPI Metal Core PCB


HASL OSP Aluminum Core Pcb

Printed Circuit Board for Led Lights, Metal Core PCB Board 1.2mm, 1.5mm, 2.0mm



Why is Aluminum used in LED light?

- The intense light produced by LEDs creates high levels of heat, which aluminum directs away from components. An aluminum PCB extends the lifespan of an LED device and provides more stability.

- Aluminum can actually transfer heat away from vital components, thus minimizing the harmful effect it could have on the circuit board.


How ABIS Working Out Manufacturing Difficulties of Aluminum PCB?


  • Raw materials are strictly controlled: The pass rate of incoming material above 99.9%. The number of mass rejection rates is below 0.01%.


  • Copper Etching Controlled: the copper foil used in Aluminum PCBs is comparatively thicker. If the copper foil is over 3oz however, the etching requires width compensation. With the high precision equipment imported from Germany, the min width/space we can control reaches 0.01mm. The trace width compensation will be designed accurately to avoid the trace width out of tolerance after etching.


  • High Quality Solder Mask Printing: As we all know, there is a difficulty in solder mask printing of aluminum PCB due to copper thick. This is because if the trace copper is too thick, then the image etched will have a large difference between trace surface and base board and solder mask printing will be difficult. We insist on the highest standards of solder mask oil in the whole process, from the one to the two-time solder mask printing.


  • Mechanical Manufacturing: To avoid reducing electrical strength caused by the mechanical manufacturing process, involves mechanical drilling, molding and v-scoring etc. Therefore, for low-volume manufacturing of products, we prioritize using the electric milling and professional milling cutter. Also, we pay high attention to adjusting the drilling parameters and preventing burr from generating.



Item Spec
Layers 1~20
Board Thickness 0.1mm-8.0mm
Material FR-4, CEM-1/CEM-3, PI, High TG, Rogers, PTEF, Alu/Cu Base, etc
Max Panel Size 600mm×1200mm
Min Hole Size 0.1mm
Min Line Width/Space 3mil(0.075mm)
Board Outline Tolerance 0.10mm
Insulation Layer Thickness 0.075mm--5.00mm
Out Layer Copper Thickness 18um--350um
Drilling Hole (Mechanical) 17um--175um
Finish Hole (Mechanical) 0.10mm--6.30mm
Diameter Tolerance (Mechanical) 0.05mm
Registration (Mechanical) 0.075mm
Aspect Ratio 16:01
Solder Mask Type LPI
SMT Mini. Solder Mask Width 0.075mm
Mini. Solder Mask Clearance 0.05mm
Plug Hole Diameter 0.25mm--0.60mm
Impedance Control Tolerance 10%
Surface finish ENIG, OSP, HASL, Chem. Tin/Sn, Flash Gold
Soldermask Green/Yellow/Black/White/Red/Blue
Silkscreen Red/Yellow/Black/White
Certificate UL, ISO 9001, ISO14001, IATF16949
Special Request Blind hole, Gold finger, BGA, Carbon ink, peekable mask, VIP process, Edge plating, Half holes
Material Suppilers Shengyi, ITEQ, Taiyo, etc.
Common Package



ABIS Circuits Co. Ltd, established in 2006, Located in Shenzhen, our company has about 1100 workers and two PCB workshops with about 50000 square meters.

Our products are mostly used in the field of Industrial Control, Telecommunication, Automotive products, Medical, Consumer, Security, and others.


Year Event
2006 ABIS Electronics Founded, and Set up the factory in Shenzhen
2008 Shenzhen Factory Put into Production and Passed the certification of Americal UL and ISO9001.
2009 Shenzhen Factory got Canada UL.and Start to make 16 Layers in Volume
2010 Overseas Sales Department ABIS Circuits Co.,Ltd established
2010 Acquired the ISO14001 environmental management system certification
2012 The manufacturing equipment was updated and a batch of cutting-edge manufacturing equipment was imported from Sweden, France, the United States, Germany, and other countries
2015 We have a 30% investment in our Subcontractor in Jiangxi, No of Employees 1200 with 5000 square meters, the plant monthly product capability reached to 40,000m2
2016 The team was refined, and all staff participated in the development training to create a wolf team.
2017 Attend Expo Electronica 2017/ electronica India
2018 Attend Expo Electronica 2018/Electronica India
2019 Attend Expo Electronica 2019/ Electronica India



1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights 0

1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights 1


1.5mm Thickness Metal Core PCB Circuit Board 35um LPI HASL OSP For Led Lights 2



Q1: How can I get a quotation:
. Please send Gerber file with format: .PCB / . P-CAD / .DXP / . Gerber

Q2: Can you manufacture my PCBs from a picture file?
. Could you please provide a sample?


Q3: Do you have PCB in stock?
. Most of our PCB board are customized, which according to Gerber file.
. ABIS has samples in stock that could be sent to you for quality checking always.

Q4: What board manufacturer do you use for FR4?
. Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan), and Shengyi (China).

Q5: Will my PCB files be checked?
. Checked within 12 hours. Once Engineer's question and working file be approved, production will start.

Q6: What do you require in order to produce an assembly quotation?
. Bill of materials (BOM) detailing:
a), manufacturers parts numbers,
b), components suppliers' parts number (e.g. Digi-key, Mouser, RS )
c), PCBA sample photos if possible.
d), Quantity




ABIS cares every your order even 1 piece




Contact Details
Abis Circuits Co., Ltd.

Contact Person: Meggie

Tel: +8617688739177

Send your inquiry directly to us (0 / 3000)


Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China

Factory Address:9 Builing 3 Floor Lisheng Park QiaoTangRd, TangWei Fuyong Town, Shenzhen China.